Enquiry
Request A Call
Sitemap
What We Offer

Deep Throat Brinell Hardness Testing Machines

  • Home
  • Deep Throat Brinell Hardness Testing Machines

Deep Throat Brinell Hardness Testing Machines

We are Dealer,Provider and Treaders of Deep Throat Brinell Hardness Testing Machines is situated In Thane,In Navi Mumbai, in Mumbai and all over India.

1. Keep the indentor up by about 25 to 50 mm from the test face.

2. Keep mode selector switch in Auto position.

3. Press cycle start button. Following operations will take place automatically:

  1. The piston with the indentor moves slowly down for application of load.
  2. The load applied will be measured by pressure sensor & displayed digitally on the panel in the closed loop system with the controller & the proportional valve (Servo valve), till the set load is reached.
  3. Application of test load & dwell time is indicated by digital panel.
  4. The set load will be kept constant till preset time period.
  5. The load is removed & the piston with indentor moves up by a pre-set distance.

4. Stop the machine & move the table. Measure the diameter of the impression in mm with a hand-held 25X magnification, 0.01 mm least count manual microscope, which is provided with a light source along with the machine.

5. After measuring the diameter of the impression, refer to the hardness chart and find out the respective Brinell hardness value.

6. After measurement of hardness, move the table to extreme right or left & unload the job by crane.

STANDARD ACCESSORIES:
MODEL TEXMACO TYPE
Piston extension of 300 mm 1 No
Ball holder with tungsten carbide ball dia. 5 mm 1 No
Ball holder with tungsten carbide ball dia. 10 mm 1 No
Test Block HBW-5/750 1 No
Test Block HBW-10/3000 1 No
Brinell microscope for manual measurement (Measurement of diameter of impression in mm with hand held 25X magnification, 0.01 mm least count manual microscope is provided with light source along with the machine. After measuring the diameter of impression, refer the hardness chart and find out the respective hardness value). 1 No
Spanners Set 1 Set
Instruction Manual 1 Book
Optional Accessories:
Test Block of Desired Hardness Range
Test block for calibrating or testing within a specific hardness range.
NABL Certificate for any Standard Test Block will cost extra.

Note: Unloading of machine to customer site, Unpacking of machine, Foundation of machine with foundation bolts & nuts in it, Keeping the machine on foundation, Hydraulic oil of required quantity & Electric supply to be arranged by customer at his cost.

We can also supply: Universal testing machines, Compression testing machines, Tensile testing machines, Horizontal chain & rope testing machines, Spring testing machines, Vickers/Brinell/Rockwell hardness testing machines, Vertical & Horizontal Dynamic balancing machines, Impact testing machines, Torsion testing machines, Fatigue testing machines, Portable Dynamic hardness tester & Special purpose Material testing machines, etc

Our Products